氫氧化鉀目前在很多行業中都有所應用，當然要想更好的發揮出它的效應來，就應該操作得當，那么我們來了解一個問題–氫氧化鉀操作使用中能兌水溶解嗎？
　　Potassium hydroxide is currently used in many industries, of course, in order to better play its effect, it should be operated properly, so we come to understand a problem — can potassium hydroxide be dissolved in water?
　　少量堿溶解后不會飛濺，溶解時，必須在水中加堿，堿中停止加水，建議您使用塑料材料。如果需要固定容量，水應該更少，溶解后，冷卻后再用水定容。在氫氧化鉀所示溶解過程中，可邊攪拌邊將氫氧化鉀加入水中，避免產品局部過熱，直至產品溶解。
　　A small amount of alkali will not splash after dissolving. When dissolving, you must add alkali in water, stop adding water to alkali. It is recommended that you use plastic materials. If a fixed volume is required, less water should be used, dissolved and cooled before using a constant volume of water. In the process of potassium hydroxide dissolution as shown, potassium hydroxide can be added to water while stirring to avoid local overheating of the product until the product is dissolved.
　　在溶解氫氧化鉀的過程中，如果產品加入過多，反應會更加劇烈，也會導致產品容易溢出。因此，一定要注意安全，做好防護措施，在不危及人身安全的前提下進行此操作。
　　In the process of dissolving potassium hydroxide, if the product is added too much, the reaction will be more violent, and the product will easily overflow. Therefore, you must pay attention to safety, take protective measures, and perform this operation on the premise of not endangering your personal safety.

　　此外，氫氧化鉀產品腐蝕性強，對其防護也有特殊要求。在工作的工人容易受到產品危害，因此要求這些員工在開始工作之前穿上防護服和工作，公司還需要安全淋浴和洗眼設備。在穿上適當?shù)姆雷o(hù)服之前，請勿觸摸損壞的容器和溢出物。
　　In addition, potassium hydroxide products are highly corrosive, and there are special requirements for their protection. Workers on the job are vulnerable to product hazards, so these employees are required to wear protective clothing and work before starting work, and the company also needs safe showers and eye washing equipment. Do not touch damaged containers and spills until appropriate protective clothing is worn.
　　盡可能切斷泄漏源，用塑料布蓋住泄漏點，減少散落；注意不要讓水進入包裝容器，用干凈的鏟子收集泄漏物，放入干凈、干燥、蓋子松動的容器中，然后取出容器，遠離泄漏區域。
　　Cut off the leakage source as far as possible, cover the leakage point with plastic cloth, reduce scattering; Take care to keep water out of the container. Collect the leakage with a clean shovel and place it in a clean, dry container with a loose lid. Remove the container away from the leaking area.
　　總之，氫氧化鉀兌水溶解實際上是一種很危險的操作，如果需要用到這一過程的話就應該提前做好預防工作，人身安全是重中之重。更多內容您可以來網站www.jinhao360.com進行咨詢。
　　In short, potassium hydroxide dissolved in water is actually a very dangerous operation, if you need to use this process, you should do a good job in advance, personal safety is the most important. For more information, please visit www.jinhao360.com.